The below instructions are provided to help in the safe and proper application of MightyDots to your valuable items. The below links also provide suggestions to where MightyDots can be placed on specific asset types.

Application Guideline

Important! Do not open dispenser prior to reading these instructions.

Please familiarize yourself with the MightyDot Identification & Security system components:

• MightyDot Dispenser (contains MightyDots & adhesive) and Brush
• Self-Adhesive Oval Warning Labels
• Bar Code sticker - Use this for your documentation
• Instructions

Use of MightyDots

MightyDots can be quickly and easily applied to almost any item or surface. Recommended, but not limited to are: personal asset items, business asset items, motorcycle parts, automobile parts, watercraft parts, etc.

Placements of MightyDots

Please use the following guidelines when applying MightyDots to your assets:

1. Areas not exposed to excessive wear, but in low usage or seldom handled areas
2. Do not apply MightyDots where it will interfere with any mechanical movements
3. Areas not exposed to excessive road grit, grease, etc.
4. For better viewing of dots, apply dots side by side and not on top of each other or overlapping. Spread Dots out a little with the brush

REMEMBER: MIGHTYDOTS ARE NOT RECOMMENDED FOR HIGHLY VISABLE OR COSMETICALLY IMPORTANT AREAS!

Preparation

The MightyDot system is easy to use. Simply decide where you are going to mark your assets with MightyDots. Make sure the asset is clean from grease, oil, wax, dirt and other deposits^*. If not, please wipe surface with Prepsol or Triclean. To make life difficult for the thief, hide most of the MightyDots, but leave a few in obvious places that can be easily seen. When applying MightyDots on vehicle parts there is no need to move or get underneath the vehicle.

How to Apply MightyDots

1. Please read safety and warning information prior to use.
2. For vehicles only: Place the MightyDot PIN barcode along with the Vehicle Identification Number of the vehicle on the work sheet. Place second barcode sticker on end of driver side door of post.
3. Shake container vigorously for 10 -20 seconds before removing cap. Unscrew lid, place applicator brush in adhesive until you can see the number of MightyDots you want to mark the item with. (If there is too much adhesive on brush, wipe some off on inside of container.)
4. For vehicles only: If contents are spilt or contaminated, record number as damaged and replace with new MightyDot PIN code. Do not mix dot kits between vehicles.
5. Dab the brush gently on the surface of the item to be marked until Dots and Adhesive remain on item. This will leave a small dab of adhesive containing the MightyDots.
6. For vehicles only: Follow our suggest locations for applying to vehicles. Please do not apply adhesive or dots on the surface paint of the vehicle, in air conditioning ducts, face of alloy wheels or any other cosmetic part of the vehicle. If done so, quickly wipe and clean with a damp cloth within 5 minutes.
7. Several markings can often be obtained from one brush full. To replenish the brush, replace brush back into container and repeat the process.
8. Care should be taken to apply enough adhesive to cover the dots. We recommend recoating marked areas with the excess adhesive. Additional layers of adhesive aid in protecting the Dots from the harsh elements and make it more difficult for thieves to remove the MightyDots.
9. When completed, ensure that bottle and brush are disposed in a manner that avoids theft, possible reuse or general pollution.

Drying Times

1. Touch dry in 10 to 20 minutes (may be longer with inclement weather)
2. Adhesive fully cures in 24 hours (based on weather conditions)
3. For vehicles, they can be driven immediately if road conditions are dry.

Warning labels

This pack contains self-adhesive warning labels which clearly indicate that your property is protected with MightyDots and hence "Too Hot to Handle". Use these at your discretion, but please ensure that they are all clearly visible on or near the treated item(s).

Registration

Once application is complete, please register your unique PIN at the MightyDot online registration site. Registration of your PIN ensures that law enforcement and insurance companies can be made aware of the identification of your assets in the event of theft. When law enforcement finds a MightyDots on a stolen item, they can then trace the part back to your contact information associated to your VIN/PIN. In the event that your asset is stolen, remember to indicate that MightyDots were applied to you item in your police report. If you do not have access to the internet, please mail the following information to the address indicated below:

Owner's Name
Phone Number
Address
PIN number.

Send to:
MightyDot
PO Box 967
Issaquah, WA  98027

^* Warning: Please observe all manufacturers' safety precautions that apply to the
item(s) you are marking and the use of handling MightyDots. MightyDots are non-toxic, please avoid contact with nose, mouth or eyes. Contact DataDot Technology to review the MSDS information before use. 1 (800) 546-4454